Ethernet

In the Ethernet Ports view, you can define parameters for the LAN ports and select which, if any port should be UPLINK.

The Ethernet Portss view shows a list of selectable ports.

Configuration

When a particular port is selected, details about it is shown in the configuration section.

Properties for unspecifed/untagged VLAN

Section Description Comment
Port Speed Configuration of transmission speed, duplex setting and auto-negotiation. Available values depend on port capacity.
Pause Frame Enable Pause Frame for flow control.

Port Speed Examples

In the Port Speed dropdown, you can select a combination of duplex setting and auto-negotiation settings for the interface.

For example:

Option Description
Full auto-negotiation Applies to both auto-negotiation and duplex setting.
Max 100Mb auto-negotiation, full duplex.
Max 100Mb auto-negotiation, half duplex.
Max 10Mb auto-negotiation, full duplex.
Max 10Mb auto-negotiation, half duplex.
Only 100Mb, full duplex.
Only 100Mb, half duplex.
Only 10Mb, full duplex.
Only 10Mb, half duplex.
Disabled Interface is disabled.

The Uplink section view allows you to select which interface to use as uplink for the device.

Configuration

Section Description
Uplink Port Port to use as uplink for the device.

Note: Selecting None will disable uplink traffic.