MultiWAN Settings
The MultiWAN Settings tab allows you to turn MultiWAN feature on or off, and configure Mutiple WAN connections.
Below the general settings is a list of selectable WANs.
When a particular WAN is selected, details about it is shown in the configuration section.
| Item | Description |
|---|---|
| Load Balancer Distribution | Disable / 1-10 (only used in balancer mode. |
| Health Monitor Method | Ping / Statistics. |
| Health Monitor Interval | Time between health checks. |
| Health Monitor ICMP Host(s) | ICMP host. |
| Health Monitor ICMP Timeout | ICMP timeout. |
| Attempts Before WAN Failover | Number of connection attempts before switching to failover WAN. |
| Attempts Before WAN Recovery | Number of connection attempts before attempting to recover WAN. |
| Failover Traffic Destination | Destination for traffic in case of failover. (Fast/ Load). |
| DNS Server(s) | Specified DNS / Automatic Selection / Customized DNS |
Add WAN
You can add as many WANS as you have WAN connections.
To add a WAN:
- Click the Add button
- Select an available WAN
A new WAN is added to the list.
- Edit the parameters as needed.
- Click Apply
Add Custom DNS Servers
To add a custom DNS server:
- Open the DNS Server(s) dropdown menu
- Select Custom
Click the 
add button
- Add the IP numbers to the DNS server
- Click Save