Reclassify

The Reclassify tab lets you configure filtering parameters in order to redefine types of traffic to include in which Class.

Reclassification can override the class on a per packet basis without altering the defined classification .

Overview

At the top of the page is a list of selectable classification groups.

When a particular group is selected, details about it is shown in the configuration section.

Adding a parameter will filter out traffic according to the parameters and assign it to the group.

Item Description Comment
Target Classification Group to assign. As configured in classification group settings
Protocol Protocol affected.  All / UDP / TCP / ICMP
Source Host Originating host(s) to affect. All / Specific host
Destination Host Receiving host(s) to affect. All / Specific host
Ports Settings for ports filtering. Port/Source/Destination/Port range
Direction Direction of traffic to be affected by the classificaton. Both/In/Out
Connbytes Connection Bytes for when to start filtering.
Precedence Quality of service parameters relating for precedence.
Packet Size Size of packets to match. Minimum size From or From-To range.
Mark Hexadecimal mark code to att to the packets. (0x000000-0xFFFFFF)
TCP flags TCP Flags to match. SYN/ACK/FIN/RST/URG/PSH

Ports Filtering

Item Description Comment
Ports List of ports anywhere (source and destination).
Source Included ports in source.
Destination Included ports in destination.
Port Range Range of ports anywhere (source and destination).