Services
The Services view lets you configure WAN access to device services.
Allow WAN Access To Running Services
At the top of the page is a list of services.
When a particular service is selected, details about it is shown in the configuration section.
Configure firewall rule for this service
The Configure firewall rule section allows you to enable and configure a firewall rule for the selected service.
Where applicable, the configuration is divided into separate sections for source and destination zones.
| Item | Description |
|---|---|
| Enable WAN forwarding for this service | Turn WAN access on or off. |
| Name | Identifier for the rule. |
| Zone | Device / Any / LAN / WAN |
| IP | IPv4 / IPv6 address. |
| MAC | MAC address. |
| Port | Port affected. |
| IP version | Any / IPv4 / IPv6 |
| Protocol | Protocol affected: (UDP / TCP / ICMP / TCP + UDP / ESP) |
| Firewall action | Firewall action to perform. |
Add Firewall Rule
Select a service in the list.
- Click the Enable WAN forwarding for this service button
The firewall settings are displayed.
- Add rule settings as needed.
- Click Apply