Classify
The classify tab lets you configure filtering parameters in order to define types of traffic to include in which Class.
Overview
At the top of the page is a list of selectable classification groups.
When a particular group is selected, details about it is shown in the configuration section.
Adding a parameter will filter out traffic according to the parameters and assign it to the group.
| Item | Description |
|---|---|
| Target | Group to assign. |
| Protocol | Protocol affected (All / UDP / TCP / ICMP). |
| Source Host | (All / Specific host). |
| Destination Host | (All / Specific host). |
| Ports | Included ports anywhere . |
| Source Ports | Included ports in source. |
| Destination Ports | Included ports in destination. |
| Port Range | Range of ports anywhere. |
| Precedence | Precedence. |
| Packet Size | Size of packets to match. |
| Direction | (Both / In / Out) |
| Mark | Hexadecimal mark code to att to the packets. (0x000000-0xFFFFFF) |
| Connbytes | Connection Bytes for when to start filtering. |
| TCP flags | TCP Flags to match. |
Add Filter
To add a filter:
- Click the Add button
- Select Classification group
- Enter QoS values as needed.
- Click Apply
Reorder
The filters are prioritized in order from top to bottom in the list.
You can rearrange the classes by using the buttons:
 | Move up |
 | Move down |