Ethernet
In the Ethernet Ports view, you can define parameters for the LAN ports and select which, if any port should be UPLINK.
Ethernet Ports
The Ethernet Portss view shows a list of selectable ports.
Configuration
When a particular port is selected, details about it is shown in the configuration section.
Properties for unspecifed/untagged VLAN
| Section | Description | Comment |
|---|---|---|
| Port Speed | Configuration of transmission speed, duplex setting and auto-negotiation. | Available values depend on port capacity. |
| Pause Frame | Enable Pause Frame for flow control. |
Port Speed Examples
In the Port Speed dropdown, you can select a combination of duplex setting and auto-negotiation settings for the interface.
For example:
| Option | Description |
|---|---|
| Full auto-negotiation | Applies to both auto-negotiation and duplex setting. |
| Max 100Mb auto-negotiation, full duplex. | |
| Max 100Mb auto-negotiation, half duplex. | |
| Max 10Mb auto-negotiation, full duplex. | |
| Max 10Mb auto-negotiation, half duplex. | |
| Only 100Mb, full duplex. | |
| Only 100Mb, half duplex. | |
| Only 10Mb, full duplex. | |
| Only 10Mb, half duplex. | |
| Disabled | Interface is disabled. |
Uplink
The Uplink section view allows you to select which interface to use as uplink for the device.
Configuration
| Section | Description |
|---|---|
| Uplink Port | Port to use as uplink for the device. |
Note: Selecting None will disable uplink traffic.