Status

The Status area provides an overview of the current situation for your device, network and services, and also contains diagnostic tools.

System

The System Status view displays information about a number of parameters regarding your gateway and its operation.

IGPM TV

The IGPM TV Status views shows information about your IPTV services and their connection status.

WiFi

The WiFi Status view shows information about the wireless network, and allows you to scan the local area for other wireless access points.

DSL

The DSL status view shows information about any DSL connections to the device.

USB

The USB devices views displays information about any USB devices connected to the gateway device.

Note: Supported file systems for USB devices are NTFS and FAT32.

Network

The Network Status view shows information about various aspects of your network.

Diagnostics

The Diagnostic Utility allows you to perform diagnostic tests from the web interface.

Voice

The Voice Status view shows information about SIP accounts, phone numbers and voice lines connected to the device.

The System Status view displays information about a number of parameters regarding your gateway and its operation.

System

The System Status overview shows basic data about the device.

Processes

The Processes view shows information about system processes and CPU usage.

The System Status overview shows basic data about the device.

Option	Description	Sample value
Hostname	The hostname for the gateway.	Inteno
Model	Gateway model.	`DG400A`
Serial No	Device serial number.	`G542012033`
MAC Address	Device MAC address.	`00:22:07:A9:CE:F9`
Filesystem	Filesystem used in gateway storage.	UBIFS
Firmware Version	Version of installed firmware.	`DG400-WU7U_INT3.5.5-160513_1617`
Other Bank	Alternative firmware.	`DG400-WU7U_INT3.13-170904_1354`
Kernel Version	The gateway operating system kernel version.	`3.13`
BRCM Version	(Broadcom Devices only) Version number for the Broadcom driver.	`4.16L.04`
CFE Version	Version of CFE.	`4.16L.05`
Local Time	Time according to the gateway internal clock.	Mon May 23 2049 17:21:12 GMT+0200 (CEST)`\| \| Uptime \| Time the gateway has been runnning since last startup. \|`5d 2h 53m 14s`\| \| CPU \| Percentage of CPU processing in use. \|`0%`\| \| Active Connections \| Number and percentage of connections to the gateway. \|`259 / 7660 (3%)`

The System Memory Status view displays information about memory usage in the device.

Option	Description	Sample value
Usage	Memory used by the system.	163144 kB / 226308 kB (72%)
Shared	Shared memory in use.	0 kB / 226308 kB (0%)
Buffered	Memory buffer in use.	0 kB / 226308 kB (0%)
Swap	Swap file system used.	0 kB / 0 kB (0%)

The System Storage Status view shows information about file systems and space used.

Option	Description
rootfs(/)	Root.
tmpfs(/tmp)	Temporary.
tmpfs(/dev)	Devices.
tmpfs(/mnt)	Mount point.
tmpfs(/dev/sda1)	An attached USB stick.

The Processes view shows information about system processes and CPU usage.

The overview shows a summary of the processes:

Item	Description	Comment
Total number of processes		96
Total CPU usage		9%

Process Detail Toggle

You can access detailed realtime information about running processes, by clicking the information toggle.

To open the Details view:

Click Click here to view details

In the details view, you can get detailed information about all processes running on the device.

For each process, information about a number of properties is displayed:

Property	Description	Comment
PID	Process ID	Unique identifier for the process.
PPID	Parent Process ID	Unique identifier for the parent process.
USER	User running the service.
STAT	State Code.
VSZ	Virtual Memory Size.
VSZP	Virtual Memory Size Percentage.
CPU	CPU Percentage.
COMMAND	The command used to run the process.

The Network Status view shows information about various aspects of your network.

Status

The Network Status view provides an overview of network elements for your device.

Clients

The Connected Clients view shows a list of clients connected to the network.

Routing Tables / Status

The Routing Status view shows the static routes configuration for the various network types.

UPnP

The UPnP Open Ports view shows the status of any UPnP ports currently in use.

DHCP

The Active DHCP Leases view shows the status of any DHCP leases currently in use.

NAT

The NAT view shows a list of active NAT mappings in the device network.

The Network Status view provides an overview of network elements for your device.

WAN6

The WAN6 view shows information about any connected IPv6 network.

LAN

The LAN view shows information about the local network connected IPv4 network.

Option	Description	Comment
IP Address	IP address of the device on the local network.	Typically `192.168.1.1`.

WAN

The WAN view shows information about any connected IPv4 network.

Option	Description
IP Address	IP address for the device on the Internet.
Gateway	IP address to the internet gateway.
Primary DNS	First priority DNS server.
Secondary DNS	Second priority DNS server.

The Connected Clients view shows a list of clients connected to the network.

Table

Column	Description	Comment
Hostname	Client hostname.
MAC Address	Client MAC Address .
IPv4 Address	Client IPv4.
IPv6 Address	Client IPv6 address.
Active Connections	Number of active connections.

The Routing Status view shows the static routes configuration for the various network types.

ARP

The ARP status view shows information about ARP routes.

IPv4

The IPv4 status view shows information about IPv4 routes.

IPv6

The IPv6 status view shows information about IPv6 routes.

IPv6 Neighbors

The IPv6 Neighbors view shows information about IPv6 devices in the network neighborhood.

The ARP status view shows information about ARP routes.

Table

The table displays information about static ARP routes.

Column	Description	Comment
IPv4 Address	IPv4.
MAC Address	Client MAC Address .
Device	Network device type.	Displayed as virtual interface name.

The IPv4 status view shows information about IPv4 routes.

Table

The table displays information about static IPv4 routes.

Column	Description	Comment
IPv4 Address	IPv4.
Gateway	IP address to the internet gateway.
Genmask	Route genmask.
Device	Network device type.	Displayed as virtual interface name.

The IPv6 status view shows information about IPv6 routes.

Table

The table displays information about static IPv6 routes.

Column	Description	Comment
IPv6 Address	IPv6 address.
Next Hop	Next Hop device.
Device	Network device type.	Displayed as virtual interface name.

The IPv6 Neighbors view shows information about IPv6 devices in the network neighborhood.

Table

The table shows information about discovered IPv6 neighbors.

Column	Description	Comment
IPv6 Address	IPv6 address.
IPv6 Status	Device status.	`INCOMPLETE` / `REACHABLE` / `STALE` / `DELAY` / `PROBE`
Device	Connected device.
MAC address	MAC address for the device.
Router	Is the device a router?	`true`/`false`

NDP Status

The RFC 4861 defines a number of statuses:

Status	Description	Comment
`INCOMPLETE`	Address resolution is in progress and the link-layer address of the device has not yet been determined.
`REACHABLE`	Device is known to have been reachable recently (within tens of seconds ago).
`STALE`	Device is no longer known to be reachable but until traffic is sent to the neighbor, no attempt should be made to verify its reachability.
`DELAY`	Device is no longer known to be reachable, and traffic has recently been sent to the neighbor. Probes should be delayed in order to give upper-layer protocols a chance to provide reachability confirmation.
`PROBE`	Device is no longer known to be reachable, and unicast Neighbor Solicitation probes are being sent to verify reachability.

The UPnP Open Ports view shows the status of any UPnP ports currently in use.

The Active DHCP Leases view shows the status of any DHCP leases currently in use.

DHCPv4 Leases

Column	Description
Hostname	Client hostname.
IPv4 Address	Client IPv4.
MAC Address	Client MAC Address.
Leasetime remaining	Time until the lease expires.

DHCPv6 Leases

Column	Description
Hostname	Client hostname.
IPv6 Address	Client IPv6 address.
DUID	Client DUID.
Leasetime remaining	Time until the lease expires.

The NAT view shows a list of active NAT mappings in the device network.

Connections

The Active Connections gauge shows how many NAT mappings are in use out of the allowed total, as a percentage and as a count.

NAT Connection Table

Connections to and from the local network to the external network are added to the table, allowing the device to handle traffic routing decisions.

The table displays information about active NAT connections.

Column	Description	Comment
Protocol	Communication protocol used.
Source	Internal IP address.
Destination.	External IP address.
Source Port	Internal Port.
Destination Port	External Port.

The WiFi Status view shows information about the wireless network, and allows you to scan the local area for other wireless access points.

General

The general WiFI Status view displays information about your wireless channels and network interfaces.

WiFi Scan

The WiFi scan view allows you to scan the area around the device to find out what other access points are visible.

Band Steering

The Band Steering view shows information about band steering.

The general WiFI Status view displays information about your wireless channels and network interfaces.

For each wireless radioinformation is displayed about:

WiFi channel in use.
Noise level in dB for the channel.
WiFi interface name.
WiFi encryption used by the interface.

Client

For each connected client, more infomation about the connected client is available.

To view more details about a client, click the expand button.

Item	Description	Example
IP-Address	Client IPv4 address.	`10.0.0.154`
MAC-Address	Client MAC address.	`1A:97:1C:C7:76:63`
DHCP	Does client use DHCP?	`true`
Idle	Is the device transmitting?	`0`
In Network	ID for connected network.	`74`
RSSI	Received signal strength indicator value.	`-42 dBm`
SNR	Signal to Noise Ratio value.	`41 dB`
Number of Antennas	Client antennas in use.	`2`
TX Rate	Transmission rate.	`130 Mbps`
RX Rate	Receive rate.	`144 Mbps`
Flags	Provided device flags.	`BRCM, WME, N_CAP, AMPDU`
HT Capabilities	Supported HT Capabilities (data rates).	`LDPC, BW40, SGI20, SGI40`
TX Total Packets	Total number of transmitted packets.	`22589`
Unicast Packets	Total packets transmitted through unicast.	`224`
TX Unicast Packets	Packets transmitted through unicast.	`224`
TX Multicast/Broadcast Packets	Packets transmitted through multicast.	`22365`
TX Failures	Transmission failures.	`0`
RX Data Packets	Received packets.	`440`
RX Unicast Packets	Received packets transmitted through unicast.	`209`
RX Multicast/Broadcast Packets	Received packets transmitted through multicast.	`231`
TX Data Packets Retried	Resent data packets.	`0`
TX Total Packets Sent	Total data packets transmitted through unicast.	`7`
TX Packets Retries	Retransmitted data packets.	`1`
TX Packets Retry Exhausted	Data Packets failed after retry.	`0`
RX Total Packets Retried	Retransmitted data packets.	`107`

The WiFi Utilization view displays information about usage for the connected devices in the network.

Table

Each available radio is displayed in a table, with one client per row.

Column	Description
MAC Address	Client MAC address.
Airtime Usage	Percentage of airtime used by the client.
Data Rate	Transmitted data rate in Mbps.
Data Usage	Percentage of available data volume used.
Physical Rate	Transmission rate in Mbps.
Retries	Percentage of connections that were retried.

The WiFi scan view allows you to scan the area around the device to find out what other access points are visible.

Chart

The scan results table displays all detected access points and information about each in a graphical manner.

Graph

Axes

The horizontal axis shows the discovered channels.

The vertical axis shows the signal strength, according to RSSI.

Color	Description	Comment
Red	Poor.
Yellow	Acceptable.
Green	Good.

Table

The scan results table displays all detected access points and information about each:

Column	Description	Comment
SSID	SSID identifying the access point.
Frequency	WiFi frequency band for the access point.
Channel	Channel used by the access point.
RSSI	RSSI strength for the signal.
Noise	Noise level for the connection to the access point.
Cipher	Cipher used for encryption in the access point.
WPS	WPS version used by the access point.

To scan a frequency band:

Select Frequency to Scan
Click Scan

The results for the selected band are displayed in the graph and table.

The Band Steering view shows information about band steering.

Status

The status section shows the current band steering status.

The information is displayed in the STA info summary table.

Column	Description
STAMAC \| Station (client) MAC address. \| \| Interface \| Client interface name. \| \| TimeStamp \| Timestamp for the steering event. \| \| Txrate	Transmission rate.
RSSI	Received signal strength indicator .
Bounce	Does the client bounce back to a particular bandafter steering? (`yes`/`no`).
Picky	Does the client prefer a particular band? (`yes`/`no`).
PSTA	Is the client a proxy station? (`yes`/`no`).
DUALBAND	Is the client dual-band capable? (`yes`/`no`).

Log

The log section contains the log file, which shows the band steering events.

The information is displayed in the Band Steering Record table.

Column	Description
Seq
TimeStamp	Timestamp for the steering event.
STAMAC \| Station (client) MAC address. \| \| Fmch	From channel (hex code).
To_ch	To channel (hex code).
Reason	Event (hex code).
Description	Description of event.

The DSL status view shows information about any DSL connections to the device.

DSL Status Information

The DSL Status Information section shows the status for the DSL line.

Line Status

Status	Description
Idle	No connection.
Handshake	Searching for connection, negotiating transfer.
Training	Connection found, testing cable.
Showtime/Active	Connection established.

DSL Mode

The DSL Mode section shows the DSL.

Bit Rate

The Bit Rate section shows transmission rates for streams in bits per second (bps).

Actual Data Rate

Column	Description
Downstream	Rate to the device.
Upstream	Reate from the device.

Operating Data

The Operating Data section shows signal strength for the DSL line.

SNR margin

The SNR Margin section displays the signal-to-noise margin for the streams.

Column	Description
Downstream	To the device.
Upstream	From the device.

Loop Attentuation

The Loop Attentuation section shows signal attentuation for the streams.

Column	Description
Downstream	To the device.
Upstream	From the device.

Error Counter

The Error Counter section lists the number of (discovered) errors for the connection.

FEC Corrections

The FEC Corrections table shows FEC corrections for the streams.

Column	Description
Downstream	To the device.
Upstream	From the device.

CRC Corrections

The CRC Corrections table shows CRC corrections for the streams.

Column	Description
Downstream	To the device.
Upstream	From the device.

Cell Statistics

The Cell Statistics section shows the number of cells transmitted for the streams.

Column	Description
Received	To the device.
Transmitted	From the device.

The IGPM TV Status views shows information about your IPTV services and their connection status.

The table shows any connected IGMP TV channels and information about each:

Column	Description
Group IP	IP address of the IGMP group.
Client IP	IP address of the client.
LAN Port	LAN Port used for the group.
WAN Port	WAN Port used for the group.
Timeout	Time until the gateway triggers IGMP query reelection.

The USB devices views displays information about any USB devices connected to the gateway device.

Note: Supported file systems for USB devices are NTFS and FAT32.

Table

The USB device information table shows information about the USB devices.

Column	Description	Comment
Device ID	Identification for the USB device.
Vendor ID	Identification for the manufacturer.
Vendor Name	Name of the manufacturer.
Device Name	Name reported by the USB device.

The CATV Status view shows information about CATV services connected to the device.

Note: Available on EG300 & EG400 only.

Option	Description	Example
Inteno model	Model.	`CATV-302`
VPD	Reverse voltage on Protection Device.	`-inf dBm`
RF	Range.	`75.7 dBµV`
RF enable	Enable RF.	`OFF`

The SFP Status view shows information about SFP connectors enabled in the device.

Information is shown in two tables; ROM information and DDM information.

Note: Available on EG300 & EG400 only.

DDM

The DDM table shows information about the DDM retrieved from the SFP.

Option	Description	Example
voltage	Port voltage.	`3.1872 (V)`
current	Port current.	`26.448 (mA)`
tx-pwr	Broadcasting power.	`0.3530 (mW)`
tx-pwr-dBm	Broadcasting power.	`-4.5223 (dBm)`
rx-pwr	Received signal power.	`0.3026 (mW)`
rx-pwr-dBm	Received signal power.	`-5.1913 (dBm)`
rx-pwr-type	Received power type.	`average`

ROM

The ROM table shows information about the ROM.

Option	Description	Example
connector	Connector type.	`SC`
ethernet	Ethernet type.	`LX`
encoding	Encoding type.	`8B10B`
rate	Line rate.	`1300`
single-mode	Single mode distance.	`20000`
vendor	Port manufacturer or vendor.	`Skylane Optics`
oui	Organizationally Unique Identifier.	`00:25:cd`
pn	Product name.	`SBU35020DR3D000`
rev	ROM Revision.	`A`
sn	Serial Number	`b19bmjrx1857`
date	ROM date.	`2016-04-21`
ddm	DDM version	`9.3`

The Diagnostic Utility allows you to perform diagnostic tests from the web interface.

Ping

The Ping Test view allows you to perform a Ping for a selected host.

Trace

The Tracing tool view allows you to perform a Traceroute Test for a selected host.

Speed Test

The Speed Test view allows you to perform a TP Test for your network, using your device as the endpoint.

The Ping Test view allows you to perform a Ping for a selected host.

To perform a ping test against an endpoint:

Enter a valid hostname or IP address in the Host to ping box
Click Ping

The result of the ping is shown below the utility.

Example:

PING 127.0.0.1 (127.0.0.1): 56 data bytes
64 bytes from 127.0.0.1: seq=0 ttl=64 time=0.208 ms
64 bytes from 127.0.0.1: seq=1 ttl=64 time=0.130 ms
64 bytes from 127.0.0.1: seq=2 ttl=64 time=0.129 ms
64 bytes from 127.0.0.1: seq=3 ttl=64 time=0.146 ms
64 bytes from 127.0.0.1: seq=4 ttl=64 time=0.130 ms

--- 127.0.0.1 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 0.129/0.148/0.208 ms

The Tracing tool view allows you to perform a Traceroute Test for a selected host.

To perform a tracroute test against an endpoint:

Enter a valid hostname or IP address in the Host to trace box
Click Trace

The result of the trace is shown below the utility.

Example:

Trace results:

traceroute to 127.0.0.1 (127.0.0.1), 30 hops max, 38 byte packets
 1  127.0.0.1  0.033 ms

The Speed Test view allows you to perform a TP Test for your network, using your device as the endpoint.

Option	Description	Comment
Direction	Traffic direction to test.	`Up and Down`, `Up`, `Down`.
Package Size	Size of test data packages to send.	Size of test packages to send.
Speedtest Server	Server to use for the test.	A number of default servers are provided, but you can edit the list.

Perform Speed Test

Example

Test results:

Downstream: 103.45 Mbit/s
Upstream: 44.10 Mbit/s

Add test server

If you have additional test servers you want to use, you can add them to the dropdown list.

To add a test server:

Click the + plus sign

A dialog is shown allowing you to enter parameters:

Option	Description	Comment
Hostname	Test Server hostname
Port	Test server port

Add a valid Server Hostname
Add a valid server Port
Click OK

Remove test server

Servers in the test server list can be removed.

To remove a test server:

Select the server in the Speedtest Server list
Click the - minus sign

The server is removed from the list immediately.

The Realtime Graphs view provides access to graphical representations of status for the device. The graphs scroll as time progresses and lines indicate the current status.

Load

The Load graph shows device load averages for different time recent periods.

Traffic

The Traffic graph shows upload and download traffic for the interfaces.

Connections

The Connections graph shows the number of currently active connections for the device.

The Load graph shows device load averages for different time recent periods.

The display is shown in realtime, and the lines represent the average over different intervals:

Color	Time
Blue	1 minute
Red	5 minutes
Purple	15 minutes

Load

The Traffic graph shows upload and download traffic for the interfaces.

Each interface is available in its own tab. The display is shown in realtime, with lines representing traffic in kbit/s:

Color	Traffic
Blue	Downstream.
Red	Upstream.

Traffic

The Connections graph shows the number of currently active connections for the device.

The lines representing different connection types:

Color	Traffic
Blue	TCP connections.
Red	UDP connections.

Connections

The Voice Status view shows information about SIP accounts, phone numbers and voice lines connected to the device.

Information is shown in two tables.

Your phone numbers

Option	Description	Comment
Name	SIP account name.	Uses type and number unless otherwise set.
User	SIP user.
Domain	SIP domain.
Registration interval	SIP registration interval domain.
Last registration	Last registration time.
Status	Current status of the line.

Voice lines

The Voice lines shows a list of connected voice lines.

Option	Description
Name	Voice line name.	Uses type and number unless otherwise set.
State	Current state of the line.

The Event Log view lets you view and manage the event log for the device.

The Log section contains log settings and lets you download the logs.

Item	Description
Download All Logs	Save the logs to the local computer.
Limit Log List	Limit the number of events.
Filter Log Messages By Source	Filter out events by freetext search in source.
Filter By Type	Filter out event types by Logging level.
Filter By	Filter out events in the log (`firewall` / `network` / `system` / `iptv`).

Overview

Overview

Configuration

Configuration

Examples

Overview

Process Detail Toggle

Configuration

Overview

Configuration

WAN6

LAN

WAN

Table

Overview

Table

Table

Table

Table

DHCPv4 Leases

DHCPv6 Leases

Connections

NAT Connection Table

Overview

Configuration

Details

Table

Chart

Axes

Table

Scan WiFi

Status

Log

DSL Status Information

Line Status

DSL Mode

Bit Rate

Actual Data Rate

Operating Data

SNR margin

Loop Attentuation

Error Counter

FEC Corrections

CRC Corrections

Cell Statistics

Configuration

Table

Configuration

Configuration

DDM

ROM

Overview

Ping Test

Example:

Traceroute Test

Example:

Configuration

Perform Speed Test

Example

Add test server

Remove test server

Overview

Graph Lines

Graph Lines

Graph Lines

Configuration

Your phone numbers

Voice lines

Log